Devasri Industries
CAMMPROFILE GASKETS
Type WGR
This type is manufactured without a guide ring it is comprised of a core metal of any specification as required with concentric grooves on both sides that covered with Graphite or Expanded PTFE. If is typically used in heat exchanger application and applied as an upgrade to double jacket gaskets or Exchanger spiral wound gaskets especially when lower load is needed. When partition required same shall be attached with inner diameter of grooved ring.
Type IGR
This type is fabricated with an integral guide ring for aligning purposes. If is suggested to be used in raised face flanges. The Gasket aomprised of a core metal of any specification as required with concentric grooves on both sides that covered with Graphite or Expanded PTFE. The sealing core is designed and sized per ASME B 16.20, EN - 12560-6 spec and depending on the flange specification the guide ring is sized to fit properly
Type IGR
This type is processed along with a loose fitting guide ring. This popular design is preferred to be used for nominal pipe size and pressure class raised face flanges and is used in equipment with excessive radial shear characteristic, thermal cycling, and expansions. The Gasket comprised of a core metal of any specification as required with concentric grooves on both sides that covered with Graphit or Expanded PTFE. The sealing core is designed and sized per ASME B 16.20, EN - 12560-6 spec and depending on the flange specification the loose fit guide ring is sized to fit properly.
Quality
Providing gaskets for diverse industrial applications.
Service
For enquiry
sales@devasrigaskets.com
+91 8939423996, +91 9363522364
© 2024. All rights reserved.Deva Sri Industries